Basic Info.
Funtion
Teaching Purpose for Universities
Transport Package
Plywood Box
Specification
aluminum structure
Product Description
MR008M Minrry Hybrid electro-Hydraulic And Electro-Pneumatic
Equipment Process Education Equipment Vocational Education Training Equipment
1.Brief introduction:
The experimental device uses double-sided structure, ie an experimental table provides places for doing pneumatic and hydraulic test experiment for two groups of four students. It can simultaneously do double-sided comprehensive pneumatic and hydraulic experiments, optimizing and sharing resources and improving products' performance. Its overall structure is simple and practical.
The training equipment is iron double matte dense spray pattern, which is beautiful, durable and practical. The basic configuration is as following: 1 set of pneumatic training components; 1 set of pneumatic PLC control module; 1 piece of low noise air compressor; 1 set of hydraulic training components; 1 set of hydraulic PLC control module; 1 piece of hydraulic test pump. The optional configuration is the computer.
This training system uses a dedicated independent hydraulic test pump with variable speed DC motor system with oil pressure setting function. You can set safe working pressure of output oil pressure. With all common hydraulic components: Each hydraulic component is equipped with mounting plate, which can be easily and freely placed in the aluminum alloy hydraulic components on the panel (the panel with "T" slot in the form of aluminum alloy structure). Oil lap using quick-change connectors; convenient disconnect without leakage.
With this set of training equipment, you can do pneumatic control and hydraulic control circuit and its corresponding basic application experiments. It can also be integrated with each other to carry out the following experiment: realized pneumatic - electric control, pneumatic - hydraulic control, electric - fluid control, and pneumatic - electric - hydraulic integrated control.
development thinking, and improve practical ability and actual operation ability, so that students after graduation can directly production practice, shorten the past when they graduate students practical ability weak defect, so as to adapt to requirements of modern measurement and control.
This training system not only for students, but also for industrial electrical, mechanical and electrical integration engineering, electrical and mechanical equipment installation, power electrical and electronic equipment installation, automation processing, regulation and control technology and technical personnel, for machinery manufacturing and electrical engineer training, the process and the process management electrical engineer training is the same.
If there is no sensor, automation production will be very difficult, therefore, sensor technology is main technology to improve productivity .
This sensor training system is designed to make students realize sensor control technology in automation system of importance and learn to select appropriate sensor in application.
Factory sensor training system enable students understand different types of sensor's working principle and use method.
II.Technical paramter
1.Input power:~220V±10% 50Hz
2.Work environment: temperature -10ºC~+40ºC humidity <85%(25ºC)
3. Whole capacity:<0.2KVA
4. Weight<280Kg
5. Safety protection: with voltage leakage protection, current leakage protection, meet national standard.
6.Aluminum base panel with hanging box
III.The bench contains the following components:
Input dispositive including:
- Potentiometer (carbon slide, winded with slider)
- NTC thermistor
- Thermocouple (K , J or T)
- Temperature sensor with integrated circuit
- Photoconductor cell
- Photovoltaic cell
- Phototransistor
- Photodiode PIN
- Deformation gauge
- Air flow sensor
- Air pressure sensor
- Inductive proximity sensor
- Hall effect sensor
- Tachymetric generator
- Hygrometric generator
- Ultra-sound receiver
Each element is equipped by connection terminals for measuringOutput device equipped by:- Heat element
- DC motor
- Electro-valve
- Ultra sound transmitter
- Relay, solenoid
- Counter/clock with light-emitting diode
Each element is equipped by connection terminalsSignal conditioning device equipped at least by:- 3 electronic circuit (comparator / adder / integrator)
- Amplifier with gain and offset adjusting
- Measure amplifier
- AC current amplifier
- 40 kHz oscillator
- 40 kHz filter
- Low-pass filter with switchable time constant
- Full wave stabilizer for precision
- Sampling and maintain circuit
- Voltage/frequency and frequency/voltage converter
- Current/voltage and voltage/current converter
- 2 oscillator circuit (RC and Wien bridge)
- Power amplifier
Each element is equipped by connection terminals
Power supply delivering all needed power for different devices
4. Complete experiment
(1) cognitive experiment of various sensors
(2) amplifier band gain and offset correction experiment
Service
We supply supply7*24 hours service, customer design service, OEM service, buyer label service. With professional engineers team and sales team, we assure you good product quality.
Certificate
Our products takes ISO9001 product management system.
No. | Feature Name | Details |
1 | Customer design | Yes |
2 | Warranty | 1 year, 2 years, 3 years or 5 years according to client requirements |
3 | Package | Plastic film+ carton+ Fine plywood |
4 | Products standard | International didactic equipment standard |
5 | Application range | Educational equipment for university, college, vocational training centers |
6 | Company philosophy | Supply best quality Chinese products to the worldwide schools. |
7 | Self owned brand | Shouldshine, SSEDU, JSS. |
8 | Production time | From 10 days to 60 days according to different items |
We have other laboratory as below
Electrical laboratory equipment,such as
PLC training workbench,
transformer training workbench,
AC machine training equipment,
DC motor trainer kit Mechatronics training equipment, such as
mechatronics training system modular product system 9 stations, robot arm trainer,
PLC electro pneumatic trainer,
electro hydraulic trainerThermal lab equipmentRefrigeration and air conditioning training equipment PCB lab equipment
Food Machine Trainer
Address:
Building No. 3 Double Innovation and Creation Industry Center, No. 803 Keyuan Road, High Tech Zone, Jinan, Shandong, China
Business Type:
Manufacturer/Factory
Business Range:
Office Supplies
Management System Certification:
ISO 9001
Company Introduction:
Jinan Minrry Technology Equipment Co., Ltd. Established in 2009, is a factory of manufacture educational equipment, vocational training equipment, didactic equipment. Minrry is Shandong Provincial High Tech and Innovation company, with self develop and research engineers team, with self owned 5000 square meters factory.
Past ISO9001, IS14001, OHSAS18001 certificats.
Minrry products exports for more than 100 countries.
Our product ranges are as belows:
Electrical training equipment
Mechatronics training equipment
Fluid lab equipment
Thermal training equipment
Refrigeration training equipment
PCB lab equipment
Our company offers variety of products which can meet your multifarious demands. We adhere to the management principles of "quality first, customer first and credit-based" since the establishment of the company and always do our best to satisfy potential needs of our customers. Our company is sincerely willing to cooperate with enterprises from all over the world in order to realize a win-win situation since the trend of economic globalization has developed with anirresistible force.