Basic Info.
Function
Didactic Equipment for University
Purpose
Vocational Training Equipment for University
Fluid Lab Equipment
Educational Equipment for Mechanical Laboratory
Transport Package
Plywood Box
Product Description
MR345E Minrry Radio Debugging Training
Device Teaching Equipment Electrical Lab Equipment1. Equipment overview
"SR-type radio debugging training device" provides power and audio and video processing modules, infrared transmitting and receiving modules, 433MHz wireless transceiver modules, radio modules, walkie-talkie modules, TV modules and other typical radio training assessment modules in a modular form , It can complete the debugging, analysis and assessment of a variety of wireless transmission equipment. It can be used as a classroom teaching demonstration, and can also be used as a radio debugger and other corresponding certificate assessments.
The product is similar as
MR-HM 150 Base module for experiments in fluid mechanics2. Equipment parameters
1. Input power Single-phase three-wire system 220V±10%, 50Hz
2. Output power: AC power 220V±10%, 50Hz
AC power supply 7.5V (1A) two sets
Fixed DC power supply +5V (1A), +12V (1A), +35V (1A), -12V (1A)
Adjustable DC power supply: 0~30V (1A)
3. Device capacity <1.5KVA
4. Working environment The ambient temperature range is -5~40ºC, relative humidity <80% (25ºC), altitude <3000 meters
5. Dimensions 1600*700*1800mm (length×width×height)
Three, equipment characteristics
1. Comprehensiveness This device integrates a variety of experimental training projects commonly used in the radio field.
2. Applicability It can meet the teaching experiments of corresponding courses in various schools. The modular structure is convenient to replace, and the depth and breadth can be flexibly adjusted according to needs.
3. Modularity Each experimental module adopts a plug-in board separated structure, with clear tasks for each module and convenient operation and maintenance.
4. Scientificity The test points have clear silk screens and intuitive meanings, and the unique failure points are set to facilitate the use of teaching examinations, certificate assessments, etc.
5. Openness Some modules reserve control interfaces to facilitate the connection with digital equipment.
6. Advancement Considering the development trend of radio, some new digital radio chip solutions have been added to enable students to have sufficient knowledge and understanding of new devices, and guide students to transition from analog devices to digital devices, keeping up with the pace of the times.
four. Modular introduction
Training platform
The table body experiment table is made of fireproof profiles, scientific in structure, compact in appearance, and the surface is sprayed with imported Dutch powder, which is wear-resistant, corrosion-resistant, high-temperature resistant, and highly insulated. The aluminum alloy structure of the table body is anodic oxidation treatment, beautiful and atmospheric. The built-in desk cabinets and drawers can be used to place training modules, training supporting equipment, training manuals and other materials. A height adjuster is installed at the bottom of the table body to ensure the levelness and stability of the table top.
The middle part of the platform is the experimental screen. The left side of the experiment screen is the experimental mesh board, which can be hung in the training hanging box; the upper right side is the test instrument placement area, where test instruments (oscilloscope, function signal generator, etc.) can be placed; the lower right side is the laptop, TV placement area.
Power control hanging box
AC220V is introduced into the hanging box through the standard D-type port on the left side of the hanging box, and the K3 terminal is output.
Equipped with "master control switch", "key switch", red "indicator", "STOP" emergency button.
220V AC power supply hanging box
220V AC power supply hanging box
The power box is equipped with three sets of sockets (providing 220V city power), which is convenient for training equipment, testing equipment and other equipment to get power. The 220V AC power supply is introduced from the upper and lower right corners of the "master control box" through the K3 connection line through the upper left and lower left terminals.
Low-voltage power supply a hanging box
The 220V AC power supply is introduced from the upper right and lower right corners of the "AC 220V power supply" through the K3 connection line through the upper left and lower left terminals.
Low-voltage power supply two hanging boxes
The 220V AC power supply is introduced from the upper right corner and the lower right corner of the "low-voltage power supply 1" through the K3 connection line through the upper left and lower left terminals.
Provide +5V (1A), +12V (1A), -12V (1A), +35V (1A) DC voltage output. When the power supply of the equipment is normal, the voltage output indicators of each channel are on.
training hanging box
The training hanging box (DL-WXD12) is powered by the power box on the top of the platform, and four 0V, +5V, +12V, -12V terminals are connected to a set of 0V, +5V on the "low-voltage power supply 2" power box on the top of the platform +12V, -12V corresponding terminal. Each training box provides 4 pairs of 0V, +5V, +12V, -12V power output, and up to 4 training modules can be placed.
TV set
Scanner (optional)
Used to monitor radio waves in space and listen to radio stations.
Oscilloscope (optional)
Signal source (optional)
- Experimental project
1. Power experiment
2. Waveform generation/conversion experiment
3. Square wave frequency conversion output experiment
4. Infrared modulation and demodulation experiment
5. Wireless transmission/reception experiment
6. Audio Experiment
7. Power amplifier circuit experiment
8. Radio Experiment
9. Walkie-talkie experiment
10. Audio and video input and output experiment
11. Audio and video modulation and demodulation transmission combination and debugging experiment
Service
We supply supply7*24 hours service, customer design service, OEM service, buyer label service. With professional engineers team and sales team, we assure you good product quality.
Certificate
Our products takes ISO9001 product management system.
No. | Feature Name | Details |
1 | Customer design | Yes |
2 | Warranty | 1 year, 2 years, 3 years or 5 years according to client requirements |
3 | Package | Plastic film+ carton+ Fine plywood |
4 | Products standard | International didactic equipment standard |
5 | Application range | Educational equipment for university, college, vocational training centers |
6 | Company philosophy | Supply best quality Chinese products to the worldwide schools. |
7 | Self owned brand | Minrry,MR |
8 | Production time | From 10 days to 60 days according to different items |
We have other laboratory as below
Electrical laboratory equipment, such as
PLC training workbench, transformer training workbench,
AC machine training equipment,
DC motor trainer kit Mechatronics training equipment, such as
mechatronics training system modular product system 9 stations, robot arm trainer,
PLC electro pneumatic trainer,
electro hydraulic trainerThermal lab equipment
Refrigeration and air conditioning training equipment PCB lab equipment
Food Machine Trainer
Address:
Building No. 3 Double Innovation and Creation Industry Center, No. 803 Keyuan Road, High Tech Zone, Jinan, Shandong, China
Business Type:
Manufacturer/Factory
Business Range:
Office Supplies
Management System Certification:
ISO 9001
Company Introduction:
Jinan Minrry Technology Equipment Co., Ltd. Established in 2009, is a factory of manufacture educational equipment, vocational training equipment, didactic equipment. Minrry is Shandong Provincial High Tech and Innovation company, with self develop and research engineers team, with self owned 5000 square meters factory.
Past ISO9001, IS14001, OHSAS18001 certificats.
Minrry products exports for more than 100 countries.
Our product ranges are as belows:
Electrical training equipment
Mechatronics training equipment
Fluid lab equipment
Thermal training equipment
Refrigeration training equipment
PCB lab equipment
Our company offers variety of products which can meet your multifarious demands. We adhere to the management principles of "quality first, customer first and credit-based" since the establishment of the company and always do our best to satisfy potential needs of our customers. Our company is sincerely willing to cooperate with enterprises from all over the world in order to realize a win-win situation since the trend of economic globalization has developed with anirresistible force.