Basic Info.
Funtion
Teaching Purpose for Universities
Transport Package
Plywood Box
Specification
aluminum structure
Product Description
MR089M Minrry Vocational Training Educational Equipment Didactic Teaching
Equipment Mechatronics Trainer Basic Level: Mobile Hydraulics-Working Hydraulics
I. Product description
1.1 Overview
This hydraulic training device adopts the open structure operation panel design according to the syllabus requirements of mechanical and electrical integration of colleges and universities for gas, electricity and hydraulic control, combined with the advantages of pneumatic relay control and hydraulic relay control experimental equipment.
Various hydraulic components can be flexibly installed on the operating panel. All joints adopt open-close quick joints at both ends, which solves the problem of oil leakage in the hydraulic circuit, is convenient and durable, reduces losses and also helps maintain environmental sanitation. Arbitrary combination of various components to form a hydraulic system with certain functions, with strong practicality.
2 Features
(1) The equipment is composed of a high-strength sheet metal frame, which is beautiful and durable. The bottom is equipped with universal wheels for easy movement; equipped with a cabinet for storing tools and devices, and the hydraulic station is integrated in the lower part of the equipment; various hydraulic valve blocks are fixed The substrate adopts special substrate profiles, and the groove interval of the panel is 25mm, which can easily plug various components on it; the upper part of the electronic control hanging box is placed, the whole is compact.
(2) Equipped with industrial series hydraulic valves, the maximum working pressure can reach 35Mpa. Each hydraulic component is equipped with an oil circuit transition base plate, which can be conveniently and freely placed on the panel. The oil circuit lap connection adopts open-close quick-change joints, which is convenient for disassembly and connection, does not leak oil, reduces loss and also helps maintain environmental sanitation.
II. Performance parameter
(1) Input power: AC: 220V
(2) Experimental table size: 1650 (length) × 700 (width) × 1800 (height)
(3) Aluminum alloy panel size: 1200 (length) × 750 (width)
(4) Groove interval: 25mm
(5) Specifications: Cabinet: 1
(6) Desktop structure: 1
(7) Casters with split grooves: 4
(8) Safety limit speed range: 1000-1500 rpm
(9) The noise at a distance of 1.5m from the hydraulic platform when the hydraulic pump is working is less than or equal to 58dB0
(10) Demonstration experiment requires only 4-6Mpa for fluid flow pressure
(11) Fuel tank: Nominal volume 35L
3.1 Electric control unit
The electrical control unit includes a master control switch hanging box, a DC power supply hanging box, an emergency stop hanging box, a relay hanging box, and a button hanging box.
3.2 Training platform
The training platform is composed of aluminum profiles and aluminum alloy substrates, which can be moved and positioned flexibly. The actuator control box is installed on the base plate, which is beautiful and generous.
3.3 Power configuration
Single-phase three-wire power input, protected by insurance, is equipped with a main power switch. In an emergency, turn off the main power switch to stop the execution object.
3.4 Hydraulic Components
Picture, model and Chinese name of hydraulic components.
- Balance valve DC6G-1-10B/50/2
- Diaphragm accumulator:
- 3-way pressure regulator:DR6DP-50/75
- pressure relief DBDH6P/100
- flow control valve DV8/1
- 1 unit shuttle valve double nonreturn valve, delockable 4WE6J-6X /ED24V
-
- 6/3-way proportional units: hand lever valve
- loading unit / cylinder
- loading unit / cylinder
- pressure compensator for open center load sensing:
- hydraulic motor
- anti-shock unit and anti-cavitation block:Direct-acting relief valve DBDH6P/100
- 4/3-way hand lever valve:4WMM6D50B/
- Electronics pressure switch:Setting method:
Connect the red and black wires to the power cord, turn off the run button, press the SET button twice, AL (lower limit pressure) will appear, press the upper button to adjust the lower limit start value,Press SET again, AH (upper limit pressure) will appear, press the upper key to adjust the upper limit stop value,Press SET again, SAVE (data saving) appears,Press SET again to return to the measurement interface,Click to run, you can use it.For example: 0.5Mpa start 0.8mpa stopAL is set to 0.5mpa, AH is set to 0.8mpa, the contact between yellow and blue is normally open, and the pressure is within the setting range. - Flow sensor
- Steering valve(orbitrol)
- Tubing line for pressureless DR10/200Y
- manifold plates
- T-distributors,return header, 4-way, pressureless and nonreturn valve
- Oil tube
- Hydraulic power station
-
IV. Precautions
1. The incoming power supply of the experimental device should be correctly connected, and the grounding should be good and reliable.
2. When using, keep your hands dry and clean, and pay attention not to scratch the surface of the equipment with sharp objects.
3. During the experiment, after the wiring is correctly connected, the instructor should confirm that it is correct before energizing the experiment. It is strictly forbidden to touch the live parts with your hands or conductive objects, and you will be responsible for the electric shock in violation of regulations.
4. After using the experimental device, turn off the main power switch and unplug the power plug from the socket.
5. When the cylinder and conveyor belt are working, it is strictly forbidden to touch the cylinder push rod and the motor rotating shaft with your hands to avoid accidental injury.
6. When encountering an emergency, disconnect the system power supply or turn off the main power switch of the control box in time.
V. Experiment content:
Experiment 1. Reversing circuit of hand lever valve
Experiment 2. The reversing circuit of the shuttle valve double nonreturn valve,delockable
Experiment 3. Single-stage regulator circuit
Experiment 4. Single-stage pressure reducing circuit
Experiment 5. Secondary pressure reducing circuit
Experiment 6. Unloading circuit using 4/3-way hand lever valve
Experiment 7. Unloading circuit using 4/2-way lever valve
Experiment 8. Balance circuit with sequence valve
Experiment 9. Brake circuit with overflow valve
Experiment 10 Secondary pressure circuit
Experiment 11. Throttle speed regulating circuit of oil inlet
Experiment 12 Throttle and speed control circuit
Experiment 13. Throttle speed regulation circuit
Experiment 14. Throttle valve parallel circuit
Experiment 15. flow control valveseries circuit
Experiment 16. Locking circuit using shuttle valve double nonreturn valve,Delockable
Experiment 17. loading unit test loop
Service
We supply supply7*24 hours service, customer design service, OEM service, buyer label service. With professional engineers team and sales team, we assure you good product quality.
Certificate
Our products takes ISO9001 product management system.
No. | Feature Name | Details |
1 | Customer design | Yes |
2 | Warranty | 1 year, 2 years, 3 years or 5 years according to client requirements |
3 | Package | Plastic film+ carton+ Fine plywood |
4 | Products standard | International didactic equipment standard |
5 | Application range | Educational equipment for university, college, vocational training centers |
6 | Company philosophy | Supply best quality Chinese products to the worldwide schools. |
7 | Self owned brand | Shouldshine, SSEDU, JSS. |
8 | Production time | From 10 days to 60 days according to different items |
We have other laboratory as below
Electrical laboratory equipment,such as
PLC training workbench,
transformer training workbench,
AC machine training equipment,
DC motor trainer kit Mechatronics training equipment, such as
mechatronics training system modular product system 9 stations, robot arm trainer,
PLC electro pneumatic trainer,
electro hydraulic trainerThermal lab equipmentRefrigeration and air conditioning training equipment PCB lab equipment
Food Machine Trainer
Address:
Building No. 3 Double Innovation and Creation Industry Center, No. 803 Keyuan Road, High Tech Zone, Jinan, Shandong, China
Business Type:
Manufacturer/Factory
Business Range:
Office Supplies
Management System Certification:
ISO 9001
Company Introduction:
Jinan Minrry Technology Equipment Co., Ltd. Established in 2009, is a factory of manufacture educational equipment, vocational training equipment, didactic equipment. Minrry is Shandong Provincial High Tech and Innovation company, with self develop and research engineers team, with self owned 5000 square meters factory.
Past ISO9001, IS14001, OHSAS18001 certificats.
Minrry products exports for more than 100 countries.
Our product ranges are as belows:
Electrical training equipment
Mechatronics training equipment
Fluid lab equipment
Thermal training equipment
Refrigeration training equipment
PCB lab equipment
Our company offers variety of products which can meet your multifarious demands. We adhere to the management principles of "quality first, customer first and credit-based" since the establishment of the company and always do our best to satisfy potential needs of our customers. Our company is sincerely willing to cooperate with enterprises from all over the world in order to realize a win-win situation since the trend of economic globalization has developed with anirresistible force.
){kind=link}