Basic Info.
Transport Package
Plywood
Product Description
MR327E Photovoltaic Panel Solar Cell Training System Technical Teaching Equipment Electrical Skills Trainer Vocational Didactic Equipment1 Introduction
1.1 Overview
This training system simulate demo solar generate electricity process, enable students to learn solar generate electricity. Solar energy panel is driven by high work power metal halide. This trainer cultivate students hand on ability, it's suitable for engineering university, training institute, technical schools.
1.2 Feature
(1)This trainer use aluminum column structure, with inner integrated measurement meters, there is universal wheels at the bottom, it's easy to move.
(2) It can do many experiment circuit and components, students can combine them to different circuit, do
different experiments and training content.
(3) Training workbench with safety protection system.
3 Capacity
(1) Solar energy generation set: whole set takes aluminum structure, photovoltaic panel can be adjusted, dimension 1400*700*1500mm(L*W*H)
(2) Work condition:
Temperature-10~+40ºC Temperature≤80ºC
Environment air: no corrosivity air, no fuel air, no large quantity of conductive dust
3 System introduction
This system can be divided to four part: photovoltaic power generation system, control system, inverter
system . Control system consist of photovoltaic controller and tracking controller. Inverter system is
made of frequency inverter and load unit.
1.Photovoltaic power generation system: this system use 2 pieces of 30W solar energy board,You can connect in series or in parallel according to different system pressure. Simulate solar light set consist of two metal halide, it can adjust the relative position with photovoltaic plate, to simulate solar light position, and demonstration. Battery group: it consist of 2 pieces 12V/40AH seal battery group, you can parallel connect use as 12V200AH system, you can also connect in series as 24V/100AH system, and deep understand battery.
2. Controller hanging box: this hanging box use industrial type charger controller, it can control photovoltaic generator to charge on battery. With LCD display board, you can check system technical parameter and can set by yourselves. It is with prevent overcharge, over current
3. Inverter hanging box: adopt 12V/24V voltage intelligent recognize frequency inverter, output voltageis
AC220V, continuously work power is 600W, peak work power is 1000W. Rotary efficiency>90%, low
voltage automatic alarm.
4. Meter box: it display generator voltage, generator current, charge voltage, charge current, inverter
voltage, inverter current in real time.
5. Terminal load hanging box: it contains incandescent light bulb, energy saving, for load
test 220V AC current from inverter.
3.2 Training workbench
Training workbench use aluminum column structure hold, with universal wheels at bottom, two wheels
are with brake, you can move and fix as your like. Desktop thickness is 25mm high density board,
surface with anti high temperature treatment, equip with three door, with two drawers, the structure is
beautiful.
3.3 Power control panel
(1) Voltage, current output indicator
(2) Equip with power indicator, safety power output terminal.
(3) Inner with AC power source, with short circuit protection function.
3.4 Equip components
(1) Controller hanging box 1 piece
(2) Inverter hanging box 1 piece
(3) Meter box hanging box 1 piece
(4) Terminal load hanging box 1 piece
(5)4mm safety electrical connection cable 25 eas
(6) Electrician tool 1 set
(7) Digital multimeter 1 ea
(8) Solar light illuminometer
(9) Portable compass
4 Experiment list
(1) Battery feature test:1) electricity technical parameter 2) Battery connect in series and parallel
(2) Charge controller experiment:1) connect inversed protection experiment 2) Controller protection on
battery overcharge 3) Controller protection on battery over discharging experiment 4) Anti charge experiment
(3) Photovoltaic generating electricity system experiment
(4) Photovoltaic charging control experiment
(5) Generator work power test experiment
(6) Photovoltaic battery open circuit voltage test experiment
(7) Photovoltaic battery short circuit current test experiment
(8) Photovoltaic battery work power test experiment
(9) To test photovoltaic battery different maximum test experiment under different illumination
(10) Photovoltaic battery output feature experiment
(11) Photovoltaic battery charging control principle experiment
(12)Photovoltaic battery anti charging experiment
(13) Photovoltaic battery connect in series and parallel experiment
(14) Inverter basic principle experiment
(15) Simple inverter output waveform test experiment
(16) Photovoltaic battery connect in series and in parallel experiment
(17) Inverter basic principle experiment
(18) Simple inverter output waveform test experiment
(19) Inverter power drive AC load experiment
(20) Solar energy tracker complementary experiment
ServiceWe supply supply7*24 hours service, customer design service, OEM service, buyer label service. With professional engineers team and sales team, we assure you good product quality.CertificateOur products takes ISO9001 product management system.No. | Feature Name | Details |
1 | Customer design | Yes |
2 | Warranty | 1 year, 2 years, 3 years or 5 years according to client requirements |
3 | Package | Plastic film+ carton+ Fine plywood |
4 | Products standard | International didactic equipment standard |
5 | Application range | Educational equipment for university, college, vocational training centers |
6 | Company philosophy | Supply best quality Chinese products to the worldwide schools. |
7 | Self owned brand | Minrry,MR |
8 | Production time | From 10 days to 60 days according to different items |
We also have below equipment, please click the link to see itelectrical training equipmentmechatronics training equipment
Address:
Building No. 3 Double Innovation and Creation Industry Center, No. 803 Keyuan Road, High Tech Zone, Jinan, Shandong, China
Business Type:
Manufacturer/Factory
Business Range:
Office Supplies
Management System Certification:
ISO 9001
Company Introduction:
Jinan Minrry Technology Equipment Co., Ltd. Established in 2009, is a factory of manufacture educational equipment, vocational training equipment, didactic equipment. Minrry is Shandong Provincial High Tech and Innovation company, with self develop and research engineers team, with self owned 5000 square meters factory.
Past ISO9001, IS14001, OHSAS18001 certificats.
Minrry products exports for more than 100 countries.
Our product ranges are as belows:
Electrical training equipment
Mechatronics training equipment
Fluid lab equipment
Thermal training equipment
Refrigeration training equipment
PCB lab equipment
Our company offers variety of products which can meet your multifarious demands. We adhere to the management principles of "quality first, customer first and credit-based" since the establishment of the company and always do our best to satisfy potential needs of our customers. Our company is sincerely willing to cooperate with enterprises from all over the world in order to realize a win-win situation since the trend of economic globalization has developed with anirresistible force.