Basic Info.
Funtion
Teaching Purpose for Universities
Transport Package
Plywood Box
Specification
aluminum structure
Product Description
MR001M Minrry Flow and Level Training
Mechatronics Training Equipment Lab Equipment
The device adopts an aluminum profile structure and integrates a variety of devices for liquid level control and flow control. It can be used to learn the process control principle and operation mode of two variables of flow and liquid level.
The electrical control part adopts a touch all-in-one machine with a touch screen as the main control element. The touch all-in-one machine is equivalent to a combination of a PLC and a touch screen (compatible with the Mitsubishi series PLC programming software), and various sensors are directly collected through the touch all-in-one machine The liquid level and flow rate are displayed on the touch screen in real time, and the corresponding parameters can be set through the touch screen to perform PID control on the flow and liquid level. The change curve of the corresponding parameters can also be displayed on the screen to understand the control changes more intuitively process.
configuration list:
1. 1 table body
2. 1 electrical control box with touch screen and configuration software
3. 1 30L water storage tank
4. 2 process water tanks
5. 1 circulating water pump
6. 1 rotameter
7. 1 pulse flow sensor
8. 1 liquid level transmitter
9. 2 float switches
10. 1 electric control valve
11. 3 solenoid valves
12. 1 PID controller
13. 2 double-pipe pressure gauges
14. 1 differential pressure gauge
15. 1 set of valves and connecting pipelines
Overview
The level/process trainer is a single circulatory system that allows the study of principles
Process control uses liquid level and flow as measured process variables. The system is
A completely independent, low-pressure flowing water circuit, supported on a reference board, makes it suitable for individual student work or group presentations.
It consists of a dual-chamber process tank connected to a pool of manual and solenoid operated valves. Water is pumped through the system through a variable area flow meter and motor control valve. The liquid level is measured in the process tank. The flow rate is measured by an optical pulse flow meter.
Features
• Contains a choice of level and flow sensors and indicators
• Flow rate controlled by linear motor control valve
•On/Off and proportional control
·P, PI and full PID control and automatic adjustment function
Dual-loop control temperature trainer
Use water as process fluid
Course coverage
• Familiarization and calibration of process and level
• Interface familiarization and calibration
• Controller familiarization and calibration
• Float level transmitter
•Pulse flow transmitter
• Switch control
Research on level and flow of P, PI and PID control
• Optimize PID controller
•Advanced process control
-Configure valve to adjust flow
-Water tank: at least 30 liters
Pump:
-Maximum output flow: 30 L/min
-max HMT: 10 meters
Power supply: 24V DC
-Electrical panel
Will be powered by 220V/50Hz
development thinking, and improve practical ability and actual operation ability, so that students after graduation can directly production practice, shorten the past when they graduate students practical ability weak defect, so as to adapt to requirements of modern measurement and control.
This training system not only for students, but also for industrial electrical, mechanical and electrical integration engineering, electrical and mechanical equipment installation, power electrical and electronic equipment installation, automation processing, regulation and control technology and technical personnel, for machinery manufacturing and electrical engineer training, the process and the process management electrical engineer training is the same.
If there is no sensor, automation production will be very difficult, therefore, sensor technology is main technology to improve productivity .
This sensor training system is designed to make students realize sensor control technology in automation system of importance and learn to select appropriate sensor in application.
Factory sensor training system enable students understand different types of sensor's working principle and use method.
II.Technical paramter
1.Input power:~220V±10% 50Hz
2.Work environment: temperature -10ºC~+40ºC humidity <85%(25ºC)
3. Whole capacity:<0.2KVA
4. Weight<280Kg
5. Safety protection: with voltage leakage protection, current leakage protection, meet national standard.
6.Aluminum base panel with hanging box
III.The bench contains the following components:
Input dispositive including:
- Potentiometer (carbon slide, winded with slider)
- NTC thermistor
- Thermocouple (K , J or T)
- Temperature sensor with integrated circuit
- Photoconductor cell
- Photovoltaic cell
- Phototransistor
- Photodiode PIN
- Deformation gauge
- Air flow sensor
- Air pressure sensor
- Inductive proximity sensor
- Hall effect sensor
- Tachymetric generator
- Hygrometric generator
- Ultra-sound receiver
Each element is equipped by connection terminals for measuringOutput device equipped by:- Heat element
- DC motor
- Electro-valve
- Ultra sound transmitter
- Relay, solenoid
- Counter/clock with light-emitting diode
Each element is equipped by connection terminalsSignal conditioning device equipped at least by:- 3 electronic circuit (comparator / adder / integrator)
- Amplifier with gain and offset adjusting
- Measure amplifier
- AC current amplifier
- 40 kHz oscillator
- 40 kHz filter
- Low-pass filter with switchable time constant
- Full wave stabilizer for precision
- Sampling and maintain circuit
- Voltage/frequency and frequency/voltage converter
- Current/voltage and voltage/current converter
- 2 oscillator circuit (RC and Wien bridge)
- Power amplifier
Each element is equipped by connection terminals
Power supply delivering all needed power for different devices
4. Complete experiment
(1) cognitive experiment of various sensors
(2) amplifier band gain and offset correction experiment
Service
We supply supply7*24 hours service, customer design service, OEM service, buyer label service. With professional engineers team and sales team, we assure you good product quality.
Certificate
Our products takes ISO9001 product management system.
No. | Feature Name | Details |
1 | Customer design | Yes |
2 | Warranty | 1 year, 2 years, 3 years or 5 years according to client requirements |
3 | Package | Plastic film+ carton+ Fine plywood |
4 | Products standard | International didactic equipment standard |
5 | Application range | Educational equipment for university, college, vocational training centers |
6 | Company philosophy | Supply best quality Chinese products to the worldwide schools. |
7 | Self owned brand | Shouldshine, SSEDU, JSS. |
8 | Production time | From 10 days to 60 days according to different items |
We have other laboratory as below
Electrical laboratory equipment,such as
PLC training workbench,
transformer training workbench,
AC machine training equipment,
DC motor trainer kit Mechatronics training equipment, such as
mechatronics training system modular product system 9 stations, robot arm trainer,
PLC electro pneumatic trainer,
electro hydraulic trainerThermal lab equipmentRefrigeration and air conditioning training equipment PCB lab equipment
Food Machine Trainer
Address:
Building No. 3 Double Innovation and Creation Industry Center, No. 803 Keyuan Road, High Tech Zone, Jinan, Shandong, China
Business Type:
Manufacturer/Factory
Business Range:
Office Supplies
Management System Certification:
ISO 9001
Company Introduction:
Jinan Minrry Technology Equipment Co., Ltd. Established in 2009, is a factory of manufacture educational equipment, vocational training equipment, didactic equipment. Minrry is Shandong Provincial High Tech and Innovation company, with self develop and research engineers team, with self owned 5000 square meters factory.
Past ISO9001, IS14001, OHSAS18001 certificats.
Minrry products exports for more than 100 countries.
Our product ranges are as belows:
Electrical training equipment
Mechatronics training equipment
Fluid lab equipment
Thermal training equipment
Refrigeration training equipment
PCB lab equipment
Our company offers variety of products which can meet your multifarious demands. We adhere to the management principles of "quality first, customer first and credit-based" since the establishment of the company and always do our best to satisfy potential needs of our customers. Our company is sincerely willing to cooperate with enterprises from all over the world in order to realize a win-win situation since the trend of economic globalization has developed with anirresistible force.